Rexroth Authorized Dealer in Sri Lanka and Maldives

Products

Rexroth Valve Amplifier

Valve amplifier for proportional valves
without electrical position feedback
Maximum current limitation 1.5 A
Type VT-MSPA2…1A5

Features

  • Command value input 0 … ±10 V
  • Maximum ambient temperature range 70 °C
  • Reverse polarity protection of the operating voltage
  • Ramp generator up and down is separately adjustable
  • Zero point setting
  • Command value adjustment
  • Characteristic curve generator
  • Clocked power output stage
  • Output short-circuit-proof
  • LED status displays
  • Measuring sockets for actual current value,
  • internal current command/setting
  • Component series 2X
  • Easy valve selection of the Rexroth valves for industrial hydraulics
  • Characteristic curves of the valves stored in the device
  • Valve optimization via push-buttons
  • All valve parameters adjustable
  • For valve with one or two solenoids and 24 V nominal voltage

Adjustable vane pump

Type PV7

Features

  • Variable displacement
  • Low operating noise
  • Extended bearing life cycle thanks to hydrodynamically
  • lubricated plain bearings
  • Pressure and flow can be controlled
  • Low hysteresis
  • Very low control up times and down control times
  • Mounting dimensions according to ISO 3019-2.
  • Connection dimensions according to ISO 6162-1 and ISO 228-1
  • Suitable for HLP, HETG, HEES and HFD-U hydraulic fluids
  • Standard Series PV7 single pumps can be combined with multiple pumps as well as internal gear, external gear, axial piston and radial piston pumps.
  • Used for drives in continuous operation with variable
  • flow requirement and a high share in the pressure holding function, e.g.:
    • machine tools
    • hydrostatic bearings
    • constant pressure systems
  • Size 14 to 150
  • Component series 1X
  • Maximum operating pressure 160 bar
  • Maximum flow 270 l/min

Rexroth Axial Pump

Axial Piston Variable Pump A7VO

Series 63

The A7VO is a variable pump with axial tapered piston rotary group in bent-axis
design for hydrostatic drives in open circuits. Flow is proportional to drive speed
and displacement. The flow can be steplessly changed by adjusting the bent axis.
For axial piston units with bent-axis design, the pistons (1) are arranged at an angle

to the drive shaft (2). The A7VO uses standard bearings and the A7VLO uses long-
life bearings. The external dimensions of the axial piston pump are identical to the

version with mechanical bearings. Long-life bearings can of course be retrospectively
installed. Long-life bearings are only available for sizes 250 to 500.
In an open circuit, the hydraulic fluid flows from the reservoir to the hydraulic pump
from where it is fed to the consumer, e.g. hydraulic motor.
From the consumer, the hydraulic fluid flows directly back to the reservoir.

Directional spool valve

Directional spool valves, direct operated, with solenoid actuation

Type WE

Features

  • 4/3, 4/2 or 3/2 directional design
  • High-power solenoid
  • Porting pattern according to DIN 24340 form A
  • Porting pattern according to ISO 4401-03-02-0-05 and NFPA T3.5.1 R2-2002 D03
  • Wet-pin DC or AC solenoids with detachable coil
  • Solenoid coil can be rotated by 90°
  • The coil can be changed without having to open the pressure-tight chamber
  • Electrical connection as individual or central connection
  • Manual override, optional
  • Spool position monitoring, optional

Order Now : +94113502847